Service must be performed at specified intervals to keep your eBicycle operating at peak performance.
Table 7: Minimum Service Intervals
Note: Perform maintenance more frequently in severe riding conditions such as extreme temperatures, dusty environments, rough roads, long storage conditions, short runs, or heavy stop & go traffic.
Perform spoke tension check at every 10 hours or after a hard ride over rough roads.
Regular maintenance needs to continue for the entire time the eBicycle is owned.
|Recommended Service||Each Ride||1 Month||6 Months||12 Months|
|(repeated at every interval)||
|Check tire pressure and tread, wheel rims for damage||X||X||X||X|
|Charge battery fully||X||X||X||X|
|Check brake functionality||X||X||X||X|
|Check lamp and reflector functionality||X||X||X||X|
|Check bell functionality||X||X||X||X|
|Verify handlebars and fork/front wheel turn||X||X||X||X|
|Check and adjust / retighten nuts, bolts, and screws and verify torque values||X||X||X||X|
|Check wheel spoke tightness||X||X||X|
|Check handlebar clamp fastener screw torque||X||X||X|
|Check axle nut torque||X||X||X|
|Inspect and lubricate kick stand and pedals||X||X||X|
|Inspect frame for cracks, breaks, nicks, failed welds||X||X||X|
|Road test to verify component and system functions||X||X||X|
|Inspect brake pads and discs for wear and alignment||X||X||X|
|Check alignment of sprocket and the belt tension||X||X|
|Inspect brake system for leaks, abrasion, or stretch||X|
CAUTION: As with all mechanical components are subjected to wear and stresses, fatigue will occur. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injury or damage. Regular servicing can help identify potential issues. The preceding table is a minimum recommendation.